GANESHA
TECHNICAL SPECIFICATIONS
| Model | GANESHA | ||
| Machine Type | Semi Automatic Drop Box Shuttle Looms | ||
| Picking | Under pick motion | ||
| Loom Width | 45”, 52”, 56”, 60”, 64”, 68”, 72”, 80” | ||
| Working Width: | 2” less than loom width | ||
| Reed: | Fast | ||
| Shuttle Box | 4×4, PICK N PICK | ||
| Shedding motion | Tappet, Dobby, Jacquard | ||
| Weft Control | Weft fork system or electronic infra-red | ||
| filler system (optional) | |||
| Warp Control | Electrical or Mechanical warp | ||
| Stop (optional) | |||
| Let-Off | Semi Positive attached / separate beam | ||
| type / electronics | |||
MACHINE CONTROL (OPTIONAL)
- Microprocessor based control panel
- Electro-magnetic brake motor
- Push Button system: i.e. START/STOP/ONE PICK / INCHING / REVERSE
- Pick counting
- Predetermined stop
- RPM indictor
- Beam over tension stop
| Take-Up | Seven wheel take-up mechanism | |||||||||||||||||||||||||||||||
| Cloth roll | VTM system / Spring Loaded (Optional) | |||||||||||||||||||||||||||||||
| Applicable Yarns | Synthetic, Silk, Polyester | |||||||||||||||||||||||||||||||
| Lubrication | Centralized lubrication system (Optional) | |||||||||||||||||||||||||||||||
| Installed Power | 0.33 Kw to 0.75 Kw | |||||||||||||||||||||||||||||||
| SPACE REQUIRED FOR INSTALLATION: | ||||||||||||||||||||||||||||||||
| Reed Space | 45” | 52” | 56” | 60” | 64” | 68” | 72” | 80” | ||||||||||||||||||||||||
| Length (ft) | 8’ 8” | 9’ 4” | 9’ 8” | 10’ | 10’ 4” | 10’ 8” | 11’ | 11’ 8’’ | ||||||||||||||||||||||||
| Width (ft) | 6’ | 6’ | 6’ | 6’ | 6’ | 6’ | 6’ | 6’ | ||||||||||||||||||||||||
