| |
 |
SALIENT
FEATURES |
| |
|
 |
Rugged
Construction: |
| |
|
|
Extra
rigid structure,Accurate specially forged
crank shaft mounted on heavy duty ball bearings
gives smooth vibration free working. Lower
power consumption. |
| |
|
|
|
| |
|
|
Predetermined
Stopping Mechanism: |
| |
|
|
Due to
predetermined stopping mechanism, loom stop
each time at the back centre (180°). It
facilitates in changing of shuttles faster,
resulting in higher efficiency. Also, there
will be no possibilities of starting mark
after changing shuttles & restarting of
the machines. |
| |
|
|
|
| |
|
|
Best
Quality Weaving: |
| |
|
|
Due to
specially designed soft picking system, the
woven fabric has a beautiful texture with
stable wefts and there will be no blemishes
on the woven fabric. |
| |
|
|
|
| |
|
|
Lower
Running Cost: |
| |
|
|
As all
the parts are manufactured with proper care
and with suitable composition of castings,
steels, bronze metal etc. Minimizes maintenance. |
| |
|
|
|
| |
|
|
Two
or More Width Fabric: |
| |
|
|
Facility
for cutter assembly with leno, yarn bobbin
stand to get two or more width of fabric on
wider width loom. |
| |
|
|
|
| |
|
|
Simple
Operation, No need of Skill: |
| |
|
|
The simple
push button system with electromagnetic, Brake
Motor doesn't require any skill of operator.
All the Driving /Start, Stop, One Pick, Inching
is controlled by just one touch of Push Button,
Latest Microprocessor Technology is used for
weft & warp breakage and beam over tension
stoppage. |
| |
|
|
|
| |
|
Parts
information |
| |
|
|
LET OFF |
| |
|
|
A
separate R.S. type let-off on Maruti gives
uniform warp tension till finish of the beam.
Both the back rest roller can be adjusted
vertically & horizontally. It meets the
requirement of various fabric. |
 |
| |
|
|
|
|
| |
|
|
LATTICE |
 |
| |
|
|
To adjustment the
longer weft pattern our Maruti is design with
reversing lattice motion |
| |
|
|
ZAMA BUFFER |
| |
|
|
To
absorb the picking stroke ZAMA buffer are
given on both sides of the loom which will
increase the life of picker picking stick
& shuttle. |
| |
|
|
|
|
| |
|
|
CENTER CUTTER |
 |
| |
|
|
This
is specially designed to get two or three
different width fabric on roll. The cutter
is very simple & can be adjusted throughout
in width. Specially usable in wider width
looms. |
| |
|
|
|
|
| |
|
|
TAKE-UP |
 |
| |
|
|
A
very simple intermittent coth take-up with
weft density up to 140 Picks/inch. |
| |
|
|
|
|
| |
|
|
CONTROL
BOX |
 |
| |
|
|
Microprocessor
based control panel for quick control and
monitoring. |
| |
|
|
- Monitor the warp break via electrical
warp stop motion.
- Monitor the weft stop.
- Monitor the warp stop in front area
of healed shafts via
infra red projector & director sensor.
- Monitor the empty shuttle by optical
sensor.
- Predetermined stopping.
- Pick counter.
- RPM Indicator.
|
